Use with a socket – Solenoid lock DSIEC-EL

For use with solenoid lock (DUOSIDA DSIEC-EL or similar) the charge controller outputs are configured as follows:

  • B – Signal. If the solenoid is locked +12V is expected, if it is unlocked 0V is expected.
  • R and W – Locking of solenoid is powered through these outputs for locking and unlocking. Locking is done with 300ms pulse. If it is detected that the solenoid has not function, the locking/unlocking action is repeated after 5 seconds. If the locking action is reverse, the wires should be swapped between R and W connections.

Connection of DSIEC-EL solenoid:

There can be different colour wires used for DSIEC-EL solenoids, therefore it is advised to consult the datasheet of the manufacturer. The connections can also be determined using a multimeter.